Tag: Synthrotek Dual Low Pass Gate

Erica Synths Mixer – DIY Build

Erica Synths Mixer II - DIY Build

The Erica Synths Mixer II is part of the DIY series that are now being offered by Synthrotek. Of course, when we heard this, we had to reach out to our friends in the shop to see if we could get irons this kit. A couple of weeks later the kit arrived and we anxious to get it into the shop and in our rack.

So what exactly is a mixer…?

A mixer is literally just that. It mixes whatever you put into it into something with all parts combined. We know how simple that sounds, especially if you think of it like cooking or baking terms. A mixer, mixers the ingredients together to make something else. 

Erica Synths simple describes the Mixer II as a “simple, straight-forward audio mixer” and that the Mixer II is an “essential part of any modular setup.” This is where Erica Synths could not be more correct. A mixer is an essential part of any music recording whether it be via a studio rack, performance rack or recording console (aka. mixer); you need it to mix your ingredients into something else. 


Synthrotek Dual Low Pass Gate – DIY Build

Synthrotek Dual Low Pass Gate (LPG) - DIY Build

SR LPG - Completed Module

Lately, we have been on a kick with the slider series from Synthrotek and for this build, we took on the Synthrotek Dual Low Pass Gate (LPG)! If you were to ask any modular artist if they had a LPG in their rack, 9 out of 10 artists would answer with a yes. It is a staple in modular racks and this is especially so with West Coast Synthesis. Synthrotek kicks it up a notch by giving us not one, but two low pass gates in one 4hp module.

 Another badass thing about this module is that when you are not using at an LPG, you can use it as a VCA! (one can’t have enough VCAs!) When in VCA mode, it bypasses the low pass filter and resonance leaving color out of your audio input. 

The Build...

Before we jump right into the build, take a minute to deconstruct the kit itself. Synthrotek does and always has offered outstanding documentation and reference material on their website. They have also included a visual BOM with the kit to help move the process along.

Being that the Dual Low Pass Gate is apart of the slider series of modules released by Synthrotek, this module would sport the same beautiful slider pots and sleek black panel. We recommend that you have some soldering skills prior to taking on this build. Even though its not really an advanced build, it does require a very steady hand and clean iron (also the board mating can get tricky if you jump the gun).


Scroll Up