Tag: Power

Synthrotek Power Pak, Adapt and S. Mult – DIY Builds

Synthrotek Power Pak, Adapt 1/4 and Stereo Buffered Mult - DIY Builds

In the vast world of modular synthesis, one has to have many tools at their disposal to get the sounds they desire. Synthrotek has recently released a set of modular tools (modules) that have small footprint in ones case, but provide a big impact to some common simple issues. 

We picked up the Stereo Buffered Mult, the Power Pak as well as the Adapt 1/4 (Quarter); an adapter module that allows you to mix and match cable types/sizes. If you would like to jump to a particular build, use the quick links to the right.

For the most part, these builds are quick and any novice builder could tackle these as their first DIY projects. The panels are the standard black with a green PCB and of course the gang over at Synthrotek provide a printed BOM with each kit. Relatively inexpensive, you can purchase them below or directly from Synthrotek. 

fin Divider

Noise Filtering Power Distribution Board by Synthrotek

Noise Filtering Power Distribution Board - DIY Kit

Instagram Photo - SR Noise Filtering Power Distribution Board Kit

At the core of all our modular racks is power. As with any eurorack module, the most common type of connector is the ribbon cable either with a 10-pin connector or a 16-pin connector. What those connectors plug into is either a busboard on a PCB or a flying bus cable. We will be taking on the Synthrotek Noise Filtering Power Distribution Board for our first June build.

We have a large custom Eurorack case that we need to fill with modules and we needed noise filtering distribution boards to ensure we have the best power/noise filtering available… Synthrotek answered the call!

We opted for this board because it has power on all three rails (-12, +12, +5) and contains an LED for each rail so that we know the power is flowing like it should. The cool thing about this distro board is that it also has its own ground connection on each rail. It can be used in conjunction with the Synthrotek Power Supply System or it can be used with various other power supplies.

On to the build, time lapse and galleries…


Synthrotek TURN Eurorack Module DIY Build

Synthrotek TURN - Power Management Module DIY Build

Synthrotek TURN - Instagram photoAre you having power issues with your Eurorack system?  Do you ever experience flashing lights of doom when you power on your system? The Synthrotek TURN might have you covered!

Let’s face it … rack systems draw and use a lot of power. Whether this be on start up or whether it be through a sustained time period (during recording, tinkering, performing, etc). Much like the Windows screen of death or the Mac spinning rainbow wheel; rapid blinking lights or no lights upon startup of a rack system can be VERY stressful. This is something that we can all face from time to time and trying to find the source of the issue can be a real task. Things like flipped power cables, bad solder joints and overloaded power rails can all be culprits. With all of these potential issues causing power draws, the gang out at Synthrotek have come up with a solution to tackle power management upon startup. Introducing the Synthrotek TURN.