Noise Filtering Power Distribution Board - DIY Kit
At the core of all our modular racks is power. As with any eurorack module, the most common type of connector is the ribbon cable either with a 10-pin connector or a 16-pin connector. What those connectors plug into is either a busboard on a PCB or a flying bus cable. We will be taking on the Synthrotek Noise Filtering Power Distribution Board for our first June build.
We have a large custom Eurorack case that we need to fill with modules and we needed noise filtering distribution boards to ensure we have the best power/noise filtering available… Synthrotek answered the call!
We opted for this board because it has power on all three rails (-12, +12, +5) and contains an LED for each rail so that we know the power is flowing like it should. The cool thing about this distro board is that it also has its own ground connection on each rail. It can be used in conjunction with the Synthrotek Power Supply System or it can be used with various other power supplies.
On to the build, time lapse and galleries…