Tag: FRUKU

FRUKU Itora – DIY Build

FRUKU ITORA - DIY Build

As the winter months approach, we find ourselves wanting to build more modules that are unique and serve a purpose. FRUKU as you know is a buddy of ours and like modules previously built, they serve a purpose. One of his latest modules is named Itora which we have no idea what significance that name means, but we had to have it.

The Itora according to FRUKU is a “cascaded” LFO module with four independent unsynced LFO speeds that are all controlled with one knob. Each LFO has a square and triangle wave output and the module features a cv input (with attenuator) for the speed parameters. Sounds rad huh? We thought so too, which is why this module is our most recent build. 

Links and more links…

Below are a series of links that have been provided by FRUKU to help assist with the use, building and buying of the ITORA.

Of course, we are here for you as well if you have any questions while building the module. Just hit us up on our Contact Page.

Let’s get on with the build…


FRUKU Glue – DIY Build

FRUKU Glue - DIY Build

FRUKU has some pretty badass modules and one of his latest, Glue is a 4hp compressor module with a lot of grit. Glue is a compressor that has a high pass filter to help clean up any sound tossed through it. The high pass filter is fixed at 20 hrtz.

As for the kit itself, it requires basic soldering knowledge and a fairly steady hand as some of the components are pretty close to one another. With that being said, we didn’t let that sway us away from taking on the FRUKU Glue for our first build of December. 

Links and more links…

Below are a series of links that have been provided by FRUKU to help assist with the use, building and buying of the Glue.

Of course, we are here for you as well if you have any questions while building the module. Just hit us up on our Contact Page.


FRUKU Evi – DIY Build

FRUKU Evi - DIY Build

One of our favorite manufacturers, FRUKU is at it again with the release of his Evi module. In only 2HP, the FRUKU Evi is an envelope follower and signal inverter, meaning that you can plug any audio signal into the module and you will output an inverted envelope. What can this do? 

Well, it can add some spice to your signal routing and bring some flare to those beats you oh so desire. As one of our first builds of the fall season, the Evi was a perfect module for us to get our hands on. Let’s get on with the build. 

Links and more links…

Below are a series of links that have been provided by FRUKU to help assist with the use, building and buying of the Evi.

Of course, we are here for you as well if you have any questions while building the module. Just hit us up on our Contact Page.

Let’s get on with the build…


FRUKU Oktra – DIY Build

FRUKU Oktra - DIY Build

As the fall season is upon us, we found ourselves going through our backlog of modules and came across the FRUKU Oktra. We have had this kit for some time, and now it was finally time to bring it to life. The Oktra has four independent outputs which can be controlled simultaneously with one knob (Macro Knob).

The four outputs all feature an attenuverter and two output sockets. If you also plug in an external signal, the macro knob is then bypassed and the module will function as a attenuverter/multiple. Sounds fancy eh? Let’s get on with the build shall we?

Links and more links…

Below are a series of links that have been provided by FRUKU to help assist with the use, building and buying of the Oktra.

Of course, we are here for you as well if you have any questions while building the module. Just hit us up on our Contact Page.

Resistors and Diodes