Tag: cattenuator

Waveform Magazine Catwalk LPG/VCA – DIY Build

December 16, 2020
BuildDIYEurorackGalleryGeneralModularPhoto GalleryPhotosReviewSynthDIYUpdatesVideos

Waveform Magazine Catwalk Cattenuator - DIY Build

As we tackled the Waveform Magazine Cattenuator, it was now time to tackle the new LPG/VCA. Like the previous build and the Mini Mult Catwalk, these modules take up about 12HP of space in your rack. Their footprint is small and their impact is huge. As previously stated, Waveform Magazine is on point with their Catwalk series. In case you have missed any of the previous builds or reviews, check out the quick links below to learn more.

Project #5 - Catwalk LPG and VCA

Let’s get onto the builds shall we? Building the Catwalk VCA or the Catwalk LPG is relatively easy. The most difficult part of this build is assembling the vactrol or optocoupler as its sometimes called. An opto-isolator (also called an optocoupler, photocoupler, or optical isolator) is an electronic component that transfers electrical signals between two isolated circuits by using light. 

You will be putting together 2 of the optocouplers for this set of Catwalks, so turn on your iron and get ready to dive right in. 

Quick Links:

Read More

Waveform Magazine Cattenuator – DIY Build

December 16, 2020
BuildDIYEurorackGalleryGeneralModularPhoto GalleryPhotosReviewSynthDIYUpdatesVideos

Waveform Magazine Catwalk Cattenuator - DIY Build

Issue #5 of Waveform Magazine is hot off the press and is steaming with all sorts of amazing modular goodness. With its reviews, interviews, industry news and modular kits, it is no wonder that so many modular enthusiasts look forward to each issue.

Since the magazines first release, we have been building the WF kits as soon as we get our hands on them. Here are the previous projects that Waveform has released and we have had the opportunity to build/review.

Issue/Project #1: PT2399 Delay

Issue/Project #2: The Gateway Oscilloscope 

Issue/Project #3: The Switchenator 

Issue/Project #4: Catwalk – Mult, Mini Mult and Ribbon 

Project #5 - Cattenuator!

As with all of the previous builds, the quality and the ingenuity continues to get better and better. Waveform really threw everyone for a shocker with their “Catwalk” series from Issue #4, being that neither of the projects took up any space in ones rack (hence the name “catwalk”).

Issue #5 is no different and we are fortunate to have another x3 Catwalk modules (actually 4, the Catwalk Attenuator contains x2 of the same modules). With all that being said and done, let us get on with the builds so you too can see how cool these new Catwalk modules are! If you would like to bypass and jump to a specific Catwalk module, use the quick links below.

Read More