Time-lapse video of the 4MS RCD Breakout Kit
We decided to take on the DIY kit of the 4MS RCD Breakout module which connects to the Rotating Clock Divider (RCD).
It was an pretty easy build as long as you have the patience for the intricate soldering of the individual ribbons in the power cable. Make sure to also pay special attention to have the switches are set. Once we were done, we hooked it up to our Synthrotek TST module to test the power cable and we were good to go.
Note: Ribbons 13-16 are not used and you can pull them down carefully and cut them off.
Next up is the 4MS RCD build – stay tuned!
~ f I N